FG-SERIES STOREFRONT
-
Clear Anodized
-
Dark Bronze Anodized
-
White-Painted
-
Black-Painted
- *Custom finish available upon request
FG450 and FG451 storefront systems are both available in shear block and screw spline fabrication. FG450 utilizes 1/4” and up to 1/2” glass, while FG451 utilizes 1” insulated glass.
FG451T features thermal-break designs to reduce heat transfer and keep internal surfaces warmer. FG451T accepts 1” insulated glass.
Features & Options
Please click on hardware to learn more.
Butt Hinge / Continuous Hinge
Butt Hinge: Best for everyday doors that do not require full-length support.
Continuous Hinge: Runs the full height of the door, distributing weight evenly along the entire edge.
C.O.C Center Hung / Offset Hung
Note: These closers allow the door to be opened 90 or 105 degrees. Center Hung: Allows the door to swing in both directions while providing a clean, frameless look.
Offset Hung: This concealed closer can only open towards one direction.
Standard / C‑Pull and Push Handles
Standard Push/Pull Handles: Rectangular handles with ridges.
C-Pull/Push Handles: Door handle in the shape of a C.
Long / Short Lever Handle
Long Lever Handle: With an extended grip, less force is required to operate.
Short Lever Handle: Taking up less space, short lever handles are great for smaller or lighter doors.
Paddle Release / Panic Device
Paddle Release: A small, hand-operated push padding that unlatches the door when pressed.
Panic Device: A long horizontal bar across the door used for emergency exits.
Standard MS Lock / Latch Lock
Standard MS Lock: Uses a solid bolt that does not move unless a key turns it.
Latch Lock: Uses a spring‑loaded latch that automatically clicks into the strike when the door closes.
Electric Strike / Magnetic Lock
Electric Strike: Remote or electronic control of a mechanically latched door with access control systems (keypads, card readers, intercoms).
Magnetic Lock: Provides high holding force using an electromagnet. It secures doors that cannot use a latch or deadlatch.
Project Highlights
View MoreMore Project Highlights
Kamakura Shirts
Kamakura Shirts 2
McDonalds
McDonalds
Charlie Bird 5 King Street
Charlie Bird 5 King Street 2
Charlie Bird 5 King Street 3
Blvd Alp
TownePlace Suites
Queens Boro Tower
Mrytle-Ave BK
Storefront - Courtyard
Ergo Park Plaza
Ergo Park Plaza
240 W 59th St
Aviv Entrance
CPW 80
Care 365 North
Storefront Project 1
Storefront Project 2
Storefront Project 3
20 Robert Pitt Drive
GAMCO's FG451 storefront system was supplied for this project.
Iron Pointe at 39 madison street
FG450/FG451 storefront framing were fabricated and supplied by GAMCO for this project.
1600 Queen Anne Rd
FG450/FG451 storefront framing were fabricated and supplied by GAMCO for this project.
Wedding hall at 400 oak
GAMCO's FG450 storefront system was supplied for this project.
15 Ross ave
GAMCO's FG450 storefront system was supplied for this project.
13 Monsey Avenue
GAMCO's FG451 storefront system was supplied for this project.
| Gamco Model / Description | Wall Thickness | Frame Depth | Profile | Glazing Thickness | Minimum Size | Maximum Size w/o Structural Reinforcement | Stainless Steel Cladding |
|---|---|---|---|---|---|---|---|
| FG450 Flush-glazed | 0.085 | 4-1/2" | 1-3/4" | 1/4", 3/8" or 1/2" | 8" x 8" | 10' x 10' | Y |
| FG451 Flush-glazed | 0.085 | 4-1/2" | 2" | 1" | 8" x 8" | 10' x 10' | Y |
| FG451T Thermal Flush-glazed | 0.085 | 4-1/2" | 2" | 1" | 8" x 8" | 10' x 10' | Y |
| Type | FG450 | FG451 | FG451T | |
|---|---|---|---|---|
| Size (Width X Height) | 10'-6" x 8'-0" | 10'-6" x 8'-0" | 10'-6" x 8'-0" | |
| ASTM E 283-91 | Air Infiltration @6.24 | <0.19 CFM/SQFT | <0.07 CFM/SQFT | <0.17 CFM/SQFT |
| ASTM E 331-93 | Water Test Pressure | 8.36 PSF | 12.11 PSF | 6.06 PSF |
| ASTM E 330-96 | Uniform Structural Design Pressure (Overload Value) | +30.08 PSF -30.08 PSF |
+45.11 PSF -45.11 PSF |
+37.59 PSF -37.59 PSF |
| AAMA 507-15 | Thermal Simulation (Glass U-Factor 0.24) | N/A | N/A | 0.38 |
| ASTM E90 | Acoustical Performance | N/A | STC: 35 OITC: 28 |
STC: 35 OITC: 28 |
